2023 New 300-615 Dumps - Real Cisco Exam Questions
Dependable 300-615 Exam Dumps to Become Cisco Certified
Cisco 300-615 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Automation | 15% | - Troubleshoot automation and scripting tools
- Troubleshoot programmability
|
| Management and Operations | 20% | - Troubleshoot firmware upgrades, packages, and interoperability - Troubleshoot integration of centralized management - Troubleshooting network security
- Troubleshoot ACI security domains and role mapping
- Troubleshoot storage security
|
| Storage Network | 15% | - Troubleshoot Fibre Channel
- Troubleshoot FCoE Cisco Unified Fabric (FIP, DCB) |
| Network | 25% | - Troubleshoot routing protocols
- Troubleshoot switching protocols, such as RSTP+, LACP, and vPC
|
Topics of Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam
candidates must know the exam topics before they start preparation. Because it will help them in hitting the core. Our 300-615 exam dumps will include the following topics:
Describing the Troubleshooting Process
- Narrow Down the Cause of the Problem
- Troubleshooting Overview
Understanding CLI Troubleshooting Tools
- Debugging, Event History, and System Monitoring
- Cisco Generic Online Diagnostics
- Ethanalyzer, Embedded Logic Analyzer Module (ELAM), and Data Plane Sampling - Capture
Troubleshooting VLANs and PVLANs
- Troubleshoot VLAN Trunking Protocol (VTP)
- VLANs and Switched Virtual Interfaces (SVIs) on Cisco Nexus Series Switches
- Troubleshoot Layer 2 Issues
- Troubleshoot VLANs, PVLANs, and SVIs
- Troubleshoot Rapid Per VLAN Spanning Tree+ (PVST+)
Troubleshooting Port Channels and Virtual Port Channels
- Common vPC Issues
- Troubleshoot vPCs
- Port-Channel Overview
- Virtual Port Channel (vPC) Overview
Troubleshooting Cisco Overlay Transport Virtualization (OTV)
- Common Cisco OTV Issues
- Hot Standby Routing Protocol (HSRP) Isolation Between Data Centers Using Cisco OTV
- Cisco OTV Troubleshooting
- Cisco OTV Features
Troubleshooting Virtual Extensible LAN (VXLAN)
- VXLAN Troubleshooting
- VXLAN Overlay Features
- VXLAN Multiprotocol Border Gateway Protocol (MP-BGP) Ethernet VPN
- Common VXLAN Issues
Troubleshooting Routing and High-Availability Protocols
- Troubleshoot Basic Routing Issues
- Troubleshoot EIGRP
- Troubleshoot First Hop Redundancy Protocol (FHRP)
- Troubleshoot OSPFv2 and OSPFv3
- Troubleshoot PIM
Troubleshoot Data Center LAN Security
- Troubleshoot Authentication, Authorization, and Accounting (AAA) and Role-Based Access Control (RBAC)
- Troubleshoot First-Hop Security
- Troubleshoot Access Control Lists (ACLs)
- Troubleshoot Control Plane Policing (CoPP)
Troubleshooting Platform-Specific Issues
- Troubleshoot Cisco In-Service Software Upgrade (ISSU)
- Cisco Fabric Services Overview
- Configure and Troubleshoot Configuration Profiles
- Troubleshoot Virtual Routing and Forwarding (VRF)
- Troubleshoot Cisco Fabric Services
Troubleshooting Fibre Channel Interfaces
- Troubleshoot Fibre Channel Port Channels
- Troubleshoot Fibre Channel Interfaces and Device Registration
- Fibre Channel Overview
- Troubleshoot Port Security and Fabric Binding
Troubleshooting Fibre Channel Fabric Services
- Troubleshoot Zoning and Fabric Merges
- Troubleshoot Cisco Fabric Services
- Troubleshoot Fibre Channel Domain and Name Services
- Troubleshoot Virtual Storage Area Networks (VSANs)
Troubleshooting NPV Mode
- N-Port ID Virtualization (NPIV) and NPV Overview
- Troubleshoot NPV Mode
Troubleshooting FCoE
- FCoE and FIP Overview
- Troubleshoot FIP
- Troubleshoot Data Center Bridging (DCB)
- Troubleshoot FCoE- and QoS-Related Issues
Troubleshooting Cisco UCS Architecture and Initialization
- Troubleshoot Cisco UCS with Embedded Tools
- Troubleshoot Cisco UCS Manager CLI
- Troubleshoot Cisco UCS Hardware Discovery
- Troubleshoot Fabric Interconnect in Standalone and Cluster Mode
- Troubleshoot Cisco UCS Management Access
Troubleshooting Cisco UCS Configuration
- Cisco UCS Manageability
- Other Service Profile Association Issues
- Troubleshoot Service Profile Association Issues Due to Unavailable Addresses
- Stateless Computing
- Troubleshoot Authentication Failures
NEW QUESTION 87
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 88 
Refer to the exhibit. An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?
- A. Set a connection timeout value of 250 in the iSCSI Adapter Policy.
- B. Configure a QoS policy on the vNIC.
- C. Configure an MTU size of 9000 on the appliance port.
- D. Statically configure the target information in the Boot Policy.
Answer: D
Explanation:
Section: Compute Platforms
NEW QUESTION 89
Refer to the exhibit.
A network engineer notices packet drops on FCoE traffic from the servers. Which action resolves the issue?
- A. Apply flowcontrol receive on the interface.
- B. Disable priority flow control on the interface.
- C. Enable priority flow control on the interface.
- D. Apply flowcontrol transmit on the interface.
Answer: C
NEW QUESTION 90
Refer to the exhibit.
A customer network uses OSPFv2 and MP-BGP protocols A network administrator installs a new Cisco Nexus Switch in the data center but experiences a BGP RIB failure Which action solves the issue?
- A. Configure the route as a BGP backdoor
- B. Use a filter list for OSPF to filter both routes
- C. Change the administrative distance of OSPF to 220
- D. Implement next-hop-self
Answer: D
NEW QUESTION 91 
Refer to the exhibit. A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues. What is the role of the interface Eth1/7?
- A. IOM host interface
- B. server interface
- C. fabric interconnect uplink interface
- D. IOM network interface
Answer: C
Explanation:
Section: Compute Platforms
NEW QUESTION 92 
Refer to the exhibit. An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
- A. "out-of-service" is the default interface status in ACI.
- B. The interface is working correctly and fully operational, but it is not in use.
- C. The interface policy is misconfigured.
- D. "out-of-service" indicates that no service graph is in use for this interface.
Answer: C
Explanation:
Section: Compute Platforms
NEW QUESTION 93
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?
- A. Install Infrastructure Firmware, then Install Server Firmware.
- B. Install Server Firmware, then Install Infrastructure Firmware
- C. Install infrastructure Firmware, then Install Hypervisor Firmware.
- D. Install Hypervisor Firmware, then Install Infrastructure Firmware
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Ma
NEW QUESTION 94
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 95
Refer to the exhibit.
The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?
- A. The SFP is unsupported.
- B. The interface is in an incorrect mode.
- C. VSAN 1 is suspended.
- D. Trunk mode must be activated.
Answer: D
NEW QUESTION 96
Refer to the exhibit.
The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?
- A. IP address of the SNMP server
- B. event statement
- C. event-default action statement
- D. policy-default action statement
Answer: A
NEW QUESTION 97
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership.
What is the cause of the issue?
- A. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
- B. The same Fabric Name value should be used before after wiping all devices.
- C. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
- D. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
Answer: D
Explanation:
Section: Compute Platforms
NEW QUESTION 98
Refer to the exhibit.
A network administrator must delete a feature group from a Cisco Nexus 5000 Series Switch. Which action resolves the issue?
- A. Detach the association with the no role command within the role configuration mode
- B. Detach the association with the no rule command within the feature-group configuration
- C. Detach the association with the no rule command within the role configuration mode
- D. Detach the association with the no role command within the feature-group configuration mode
Answer: D
NEW QUESTION 99
Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 100
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 101
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?
- A. Roll back to the previous firmware.
- B. Use AutoInstall to reinstall the firmware.
- C. From the peer IOM, reset the faulty module.
- D. Restore UCSM configuration from backup.
Answer: B
NEW QUESTION 102
An engineer is troubleshooting a packet flow from an access leaf to spine. Which EVPN routes are expected on this connection?
- A. EVPN Type 1-5
- B. EVPN Type 9-15
- C. EVPN Type 0,16
- D. EVPN Type 0,9,15
Answer: A
NEW QUESTION 103
An engineer is implementing, Fibre Channel (FC) switching on a Cisco 9000 Series Switch, but the procedure fails with the message "FC traffic is not being routed through the fabric.". Which action resolves the issue?
- A. Configure the FSPF for VSAN 10 on the NX9k-01-LAB switch.
- B. Configure the VSAN ID 10 on the link connected to fc1/12.
- C. Set the FSPF interface link cost to be less than 30,000 in the IVR path.
- D. Set the FSPF hello interval on fc12 interface the NX9k-01-LAB switch.
Answer: D
NEW QUESTION 104
Refer to the exhibit.
An engineer must save the running configuration to startup-config and generate a syslog message indicating that the configuration was modified, but an error was received. Which action resolves the issue?
- A. Add event-default as a second action of the EEM script.
- B. Save the configuration using a user with network-admin role.
- C. Change the syslog action number to 1.
- D. Use the extended command copy running-config startup-config.
Answer: A
NEW QUESTION 105
......
Career Opportunities
Passing the Cisco 300-615 exam on the first try will help you get the specialist- and professional-level certificates as well as demonstrate to the current or future employer that you are a specialist in the data center solutions field and worthy of the desired position. Thus, the roles that you can choose from include a Data Center Engineering Telecom Manager, a Data Center Systems Administrator, an Infrastructure Manager, a Data Center Technician, and a Data Center VMware Engineer. If you are thinking about what income to expect, you can imagine a range of $39,000-145,000 per year, depending on your title.
Get Ready with 300-615 Exam Dumps (2023): https://braindumps.exam4docs.com/300-615-study-questions.html
